Mitsubishi Fuso FE85PE6SRDG3 Trucks !

Stainless Steel Chequer plate

Side Railing & Chequer plate



Max G.V.W     7500 kg
Kerb weight approx.2375 kg
Wheelbase (W.B.) 3350 mm
Overall length (O.A.L.) 6015 mm
Overall width (O.A.W.) 2035 mm  
Overall height (O.A.H.) 2195 mm
Tread- Front (T.F.) 1665 mm  
  - Back (T.R.) 1560 mm  
Ground clearance approx. (G.C.) 195 mm  
Cab to rear axle (C.A.) 2825 mm
Cab to end frame (C.E.) 4305 mm
Frame width (F.W.) 753 mm
Front overhang (F.O.H.) 1145 mm  
Rear overhang (R.O.H.) 1480 mm
Model MITSUBISHI FUSO 4D34-2AT4 turbocharge with intercooler
Type 4-stroke, water-cooled, direct injection diesel engine
No. of cylinders 4 in line
Piston displacement 3908 cc
Max. output (PS@rpm) 136@2,900
Max. torque (Nm@rpm) 370@1,600
Air cleaner Dry paper element type
Alternator 24V – 50Amps
Clutch Hydraulic control, single dry plate
Transmission M035S5/ 5 forward and 1 reverse speed, manual, overdrive/ 2nd – 5th : Synchromesh gears/ 1st & Reverse : Constantmesh gears
Gear ratios 5.38 – 3.028 – 1.700 – 1.00 – 0.722 – Rev.5.380
Final reduction gear Single reduction, hypoid gear
Ratio 6.166 
Axle - Front Reverse Elliot, “I” beam type Reverse Elliot, 
  - Rear Full floating type
Rear – 215/75R17.5 Front – 215/75R17.5

Steering Ball nut type with integral type hydraulic power booster. Telescopic and tilt steering column with steering lock
Suspension - Front
Laminated leaf springs with shock absorbers and stabilizer
  - Rear Laminated leaf springs with shock absorbers Main and auxiliary laminated leaf springs with shock absorbers
Brake - Service Hydraulic with vacuum servo assistance, dual circuit with antilock brake system (ABS) & auto brake shoes adjuster
  - Parking Internal expanding-type on propeller shaft  
  - Auxiliary Exhaust brake
Fuel tank 70 liters 100 liters 100 liters 100 liters  
Electrical system 12 Volt x2, 65Ah at 20hr rate

Jarec Cheong